Наш специалист перезвонит вам в течение 5-ти минут и
проконсультирует вас по возможностям станков,
комплектациям, ценам и другим условиям поставок.
Или просто перезвоните нам по номеру:
8-800-550-07-90
16 417 roubles/month
Interest-free installments for 12 months Choose a complete set
The Azhur 1-M bending machine is one of our biggest sellers. It helps to manufacture the elements that are frequently used in artistic forging. It is used to bend and twist metal without heating up the workpiece. It processes round and square bars, strips, and profiled tubes. This machine fabricates elements like Volyutas (Volutes), Chervonkas (Curves), Baskets, Torsions, Rings, and Arches of various diameter.
| Supply voltage | 220V / 380V |
| Productivity per shift | from 480 complex to 5000 simple elements |
| Electrical engine power | 3.0 kW |
| Factory warranty | 1 year |
Bending machine Azhur 1-M
Станок в базовой комплектации
Станок в базовой комплектации
Samples
AC-1 power unit assembled
Represents an electromechanic drive for the A-1 forging unit.
Represents an electromechanic drive for the A-1 forging unit.
Samples
A-1 assembled forging unit* is intended for shaping end sections such as Duck Feet , Feet with two-sided pattern, Cut Spikes, and Dome-Shaped Spikes. It also operates on removable fixtures.
Round and square rolled products, 6, 8, 10, 12, 14, 16 mm, 15 x 15 profiled tubes
Round and square rolled products, 6, 8, 10, 12, 14, 16 mm, 15 x 15 profiled tubes
Samples
Unit used for fabrication of Tight Curl elements
It is installed on AС-1 or AС-3 power units.
It is installed on AС-1 or AС-3 power units.
Samples
Furnace
Used for heating up end sections of workpieces
Used for heating up end sections of workpieces
Samples
Горн без задней стенки для "Ажур-1М"
Размеры горна: длина-295 мм., высота-240 мм., ширина-240 мм. Служит для разогрева заготовок. Благодаря отсутствию задней стенки у горна, заготовка может быть разогрета в любом участке.
Размеры горна: длина-295 мм., высота-240 мм., ширина-240 мм. Служит для разогрева заготовок. Благодаря отсутствию задней стенки у горна, заготовка может быть разогрета в любом участке.
Samples
Set of rollers for fabrication of Feet from the 15 x 15 mm profiled tubes.
Used to fabricate Feet from the 15 x 15 mm profiled tubes
Used to fabricate Feet from the 15 x 15 mm profiled tubes
Samples
Set of rollers for fabrication of Feet using the 20 x 20 mm profiled tubes
Used to fabricate Feet from the 20 x 20 mm profiled tubes
Used to fabricate Feet from the 20 x 20 mm profiled tubes
Samples
Set of knurl rollers for fabrication of collar strips
used to fabricate 20 x 1.5 mm and 20 x 2 mm collar strips.
used to fabricate 20 x 1.5 mm and 20 x 2 mm collar strips.
Samples
Set of rollers for preparing 15 x 15 mm profiled tubes.
Used to prepare 15 x 15 mm profiled tubes.
Used to prepare 15 x 15 mm profiled tubes.
Samples
Set of rollers for preparing 20 x 20 mm profiled tubes
Used to prepare 20 x 20 mm profiled tubes
Used to prepare 20 x 20 mm profiled tubes
Samples
Set of rollers for preparing profiled tubes
used to prepare 25 x 25 mm profiled tubes.
used to prepare 25 x 25 mm profiled tubes.
Samples
The Ø 125 Drum
is used to fabricate the Ø 125 Ring. Round/square 6, 8, 10, 12 mm.
is used to fabricate the Ø 125 Ring. Round/square 6, 8, 10, 12 mm.
Samples
The Ø 114 Drum
is used to fabricate the Ø 114 Ring. Round/square 6, 8, 10, 12 mm.
is used to fabricate the Ø 114 Ring. Round/square 6, 8, 10, 12 mm.
Samples
The Ø 90 Drum
is used to fabricate the Ø 90 Ring. Round/square 6, 8, 10, 12 mm.
is used to fabricate the Ø 90 Ring. Round/square 6, 8, 10, 12 mm.
Samples
The Ø 70 Drum
is used to fabricate the Ø 70 Ring. Round/square 6, 8, 10, 12 mm.
is used to fabricate the Ø 70 Ring. Round/square 6, 8, 10, 12 mm.
Samples
The Ø 50 Drum
is used to fabricate the Ø 50 Ring. Round/square 6, 8, 10, 12 mm.
Ulitka (Snail) Б1 fixture
Used to fabricate large-sized Volyuta (Volutes) and Chervonka (Curves) elements. Profiled tube Round/square 8, 10, 12, 14, 16 mm
Used to fabricate large-sized Volyuta (Volutes) and Chervonka (Curves) elements. Profiled tube Round/square 8, 10, 12, 14, 16 mm
Samples
Ulitka (Snail) М1 fixture
Used to fabricate extra small-sized Volyuta (Volute) elements. Profiled tube, round/square 8, 10, 12 mm.
Used to fabricate extra small-sized Volyuta (Volute) elements. Profiled tube, round/square 8, 10, 12 mm.
Samples
Ulitka (Snail) М2 fixture
Used to fabricate extra small-sized Chervonka (Curve) elements. Profiled tube, round/square 8, 10, 12 mm.
Used to fabricate extra small-sized Chervonka (Curve) elements. Profiled tube, round/square 8, 10, 12 mm.
Samples
Ulitka-БЛ fixture
Used to fabricate Volyuta (Volute) and Chervonka (Curve) elements without the Duck Feet. Round/square 10, 12 mm.
Used to fabricate Volyuta (Volute) and Chervonka (Curve) elements without the Duck Feet. Round/square 10, 12 mm.
Samples
Ulitka-БМ fixture
Used to fabricate Roman curls. Profiled tube, round/square 8, 10, 12, 16 mm; length of workpiece – 1,600 mm.
Used to fabricate Roman curls. Profiled tube, round/square 8, 10, 12, 16 mm; length of workpiece – 1,600 mm.
Samples
Ulitka (Snail) М3 fixture
Used to fabricate Volyutas (Volutes) without straight section elements. Profiled tube, round/square 8, 10, 12, 16 mm; length of workpiece – 1,600 mm.
Used to fabricate Volyutas (Volutes) without straight section elements. Profiled tube, round/square 8, 10, 12, 16 mm; length of workpiece – 1,600 mm.
Samples
Ulitka (Snail) Т1 fixture
Used to fabricate Volyuta (Volute), Chervonka (Curve), and Zapyataya (Comma) elements with Tight curl ends. Round/square 10, 12, 14, 16 mm.
Used to fabricate Volyuta (Volute), Chervonka (Curve), and Zapyataya (Comma) elements with Tight curl ends. Round/square 10, 12, 14, 16 mm.
Samples
Ulitka (Snail) for Reverse-Bend End Sections #1
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=100, B=165). Round/square 12 mm, length of workpiece – 500 mm.
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=100, B=165). Round/square 12 mm, length of workpiece – 500 mm.
Samples
Ulitka (Snail) for Reverse-Bend End Sections #2
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=150, B=210). Round/square 12 mm, length of workpiece – 700 mm.
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=150, B=210). Round/square 12 mm, length of workpiece – 700 mm.
Samples
Ulitka (Snail) for Reverse-Bend End Sections #3
Used to fabricate Chervonkas (Curves) with reverse-bend end sections (H=135, B=320). Round/square 12 mm, length of workpiece – 935 mm.
Used to fabricate Chervonkas (Curves) with reverse-bend end sections (H=135, B=320). Round/square 12 mm, length of workpiece – 935 mm.
Samples
Ulitka (Snail) for Reverse-Bend End Sections #4
Used to fabricate Chervonkas (Curves) with reverse-bend end sections (H=150, B=370). Round/square 12 mm, length of workpiece – 1,060 mm.
Used to fabricate Chervonkas (Curves) with reverse-bend end sections (H=150, B=370). Round/square 12 mm, length of workpiece – 1,060 mm.
Samples
Ulitka (Snail) for Reverse-Bend End Sections #5
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=190, B=260). Round/square 12 mm, length of workpiece – 960 mm.
Used to fabricate Volyutas (Volutes) with reverse-bend end sections (H=190, B=260). Round/square 12 mm, length of workpiece – 960 mm.
Samples
Ulitka (Snail) У2 fixture
Used to fabricate elements such as Curls, Volyutas (Volutes), and Chervonkas (Curves). Round/square 8, 10, 12, 14, 16 mm; 6 x 12 mm strip; 10 x 10, 15 x 15, 20 x 20 mm prepared profiled tubes.
Used to fabricate elements such as Curls, Volyutas (Volutes), and Chervonkas (Curves). Round/square 8, 10, 12, 14, 16 mm; 6 x 12 mm strip; 10 x 10, 15 x 15, 20 x 20 mm prepared profiled tubes.
Samples
Ulitka (Snail) ПТ fixture
Used to fabricate Volyuta (Volute) and Chervonka (Curve) elements from the 15 x 15 and 20 x 20 mm profiled tubes.
Used to fabricate Volyuta (Volute) and Chervonka (Curve) elements from the 15 x 15 and 20 x 20 mm profiled tubes.
Samples
Basket fixture
Used to fabricate Basket elements from 4 rods welded on ends. Round/square 12 mm, 6 x 4 mm workpiece, L=125 mm. Round/square 16 mm, 8 x 4 mm workpiece, L=150 mm. Round/square 20 mm, 10 x 4 mm workpiece, L=235 mm.
Used to fabricate Basket elements from 4 rods welded on ends. Round/square 12 mm, 6 x 4 mm workpiece, L=125 mm. Round/square 16 mm, 8 x 4 mm workpiece, L=150 mm. Round/square 20 mm, 10 x 4 mm workpiece, L=235 mm.
Samples
Torsion fixture
Used for lengthwise twisting of squares and strips. Used for lengthwise twisting of squares and strips. 10, 12, 14, 16, and 20 mm squares and strips of up to 40 x 10 mm are used as workpieces.
Used for lengthwise twisting of squares and strips. Used for lengthwise twisting of squares and strips. 10, 12, 14, 16, and 20 mm squares and strips of up to 40 x 10 mm are used as workpieces.
Samples
Bending unit
Round/square 20 mm, 40 x 4 mm strip, profiled tubes up to 40 x 40 mm. Supplied with replaceable rollers for 1/2 and 3/4-inch tubes.
Round/square 20 mm, 40 x 4 mm strip, profiled tubes up to 40 x 40 mm. Supplied with replaceable rollers for 1/2 and 3/4-inch tubes.
Samples
Fixtures for reverse bending of end sections for Feet
Used for reverse bending of end sections of Feet elements
Used for reverse bending of end sections of Feet elements
Samples
A set for fabricating collars used to close welding joints on metal products
used to fabricate П-shaped decorative brackets (collars) which are used for closing welding joints on metal products The set includes: arbor – 1 pc, lever – 1 pc, lever clip – 2 pcs. 2 x 20 and 1.5 x 20 mm strip.
used to fabricate П-shaped decorative brackets (collars) which are used for closing welding joints on metal products The set includes: arbor – 1 pc, lever – 1 pc, lever clip – 2 pcs. 2 x 20 and 1.5 x 20 mm strip.
SamplesКомпания «Ажурсталь» предлагает вам самостоятельно подобрать комплектацию станка
согласно вашим требованиям и пожеланиям.
Сообщите менеджеру о нужной вам оснастке, и мы включим ее в комплектацию станка!
Компания «Ажурсталь» предлагает вам самостоятельно подобрать комплектацию станка
согласно вашим требованиям и пожеланиям.
Сообщите менеджеру о нужной вам оснастке, и мы включим ее в комплектацию станка!
13 August
История получения гранта на развитие бизнеса по художественной ковке на станках «Ажур»
More detail
If you need expert advice, we will be happy to answer your questions by phone:
8-800-550-07-90 or +7 (351) 220-55-00
- 8, 10, 12, 14, 16 mm, 
- 15х15, 20х20 mm
